Description:【Two Way Conversion】 :The 3

5in IDE to SATA adapter card can be converted in both directions, so that your old IDE hard drive can be connected to a SATA motherboard, or your old motherboard can be connected to a SATA hard disk

【Easy to Install】: 3

5in IDE to SATA Riser Card, standard SERIAL ATA specification, supports large capacity storage devices (depending on the motherboard)

It can be used with various machines and is easy to install

【Features】: IDE Hard Disk Drive Adapter, support hot swap, plug and play; transfer rate up to 1

5GB/S

【Applicability】: 3

5 inch IDE to SATA adapter card supports standard ATAPI, ATA/133, ATA/100, ATA/66, ATA/33

EIDE

【Easy to Use】: The old IDE motherboard can be connected to the SATA hard disk, no driver is required, and the hard disk can be found directly in the host BIOS or DOS, WINDOWS

Specification:Material:PCBSATA hard disk cable length: 29CMWire length: 20CM

There is a 40pin IDE port

Connect the IDE cableHas a SATA portThere is a 4pin power portConvert Parallel ATA motherboard device to SATA interfaceCompatible with SATA 1

0 standardSize Chart:5

5cmx4

5cmx1cm/2

17inchx0

39

77inchx1inchPackage Includes:1x 3

5in IDE to SATA Riser CardNote:Please allow slightly errors due to manual measurement and different monitors